Chloroplast Pendant

 Jewelry Shipping

(please scroll down for T-shirt shipping information)

Jewelry in stock at Ontogenie will be shipped within 1-2 days.

Delays may occur due to coronavirus-based shipping disruption.

Australia	UPS 6-8 days	free
Canada	UPS 3-5 days	free
European Union	UPS 2-9 days	free
Germany	DHL 1-2 days	free
Hong Kong	DHL 3-5 days	free
Iceland	UPS 3-5 days	free
Japan	UPS 3-5 days	free
Norway	DHL 2-4 days	free
Singapore	UPS 3-5 days	free
South Africa	UPS 4-6 days	free
Switzerland	DHL 2-4 days	free
Taiwan	UPS 3-5 days	free
United Kingdom	UPS 3-5 days	free
United States	UPS 3-5 days	free
Rest of World	please contact ontogenie3d@gmail.com

You will be notified by mail when your order ships and given a tracking number so that you can follow your shipment. Ontogenie jewelry is shipped internationally from Germany via UPS and DHL. Your jewelry will be gift-wrapped in original Ontogenie packaging.

Please note that shipments may be delayed for reasons beyond my control. In the unlikely event that your jewelry shipment is held by your local customs office, you are responsible for paying any fees incurred.

T-Shirt Shipping

T-shirt shipping is free.

T-shirt printing requires 2-7 days fulfilment time. After fulfilment, your shipment should arrive in 3-10 business days.

In the unlikely event that your T-shirt shipment is delayed by your local customs office, Ontogenie is not liable for any fees incurred.

Ontogenie jewelry is 3D printed in wax and then cast in solid sterling silver, solid bronze, or solid brass plated with 14K gold. The sterling silver and bronze pieces will tarnish and discolor slightly over time. This is completely normal for these materials. Moisture, chlorine, sulfur (i.e. onions, garlic), hand sanitizers, and the oils in your skin may accelerate the tarnishing process. I recommend that you don't wear the jewelry in water, e.g., while bathing, showering or swimming. After wear, it's a good idea to polish the jewelry with a soft cloth and store it in a dark, dry place to slow the oxidation which causes tarnish.

If the jewelry should tarnish, it can be returned to its original brilliance and color by using a gentle, non-abrasive cream silver polish. I do not recommend silver wipes, baking soda or toothpaste as these can scratch the surface of mirror polished jewelry.

Highly detailed and textured pieces will be more difficult to polish because of surface variations. To polish these, I recommend using a very soft toothbrush with the cream silver polish to allow cleaning of small crevices. After polishing, you can remove excess polish by rinsing the jewelry in water and then washing the piece with a gentle detergent followed by a final water rinse.

The gold-plated materials, however, should not be vigorously polished as the plating is likely to wear off over time. The gold-plated materials are much less susceptible to tarnishing and will probably never need to be polished except with a soft cloth to remove fingerprints.

All of the jewelry should be protected from impact against hard surfaces as this can cause scratching. 

3D printing offers a diverse array of materials for jewelry design.

Cast metals

The cast metals are first 3D printed in wax with a high resolution printer using my design file. A plaster mold is then poured around the wax and the plaster is allowed to set. The wax is melted away, the plaster form is filled with molten metal and the metal is allowed to harden (lost wax casting). After being released from the mold, the metal piece can be polished to a shiny gloss or left unpolished.

The photo on the left shows the Mitochondrion pendant design printed in polished sterling silver, polished bronze and 14K gold plated brass.

Both silver and bronze will tarnish slightly over time. Bronze tarnishes to a warm brown and silver to a darker gray. This is completely normal for these materials. They can both be brightened with a gentle silver polish and soft cloth. The 14K gold plated brass material is a brass with a thin coating of 14K gold. Care should be taken that the plated jewelry is not exposed to friction as this could result in small areas of the plating rubbing off.

If you would prefer that your jewelry be printed in solid platinum, 14K gold, 14K rose gold, 14K white gold or 18K gold, please contact me for a nonbinding quote on the price.

Steel

In contrast to the cast metals, steel is created by 3D printing a liquid binder onto a bed of steel powder. The resulting print is infused with bronze and baked in an oven to harden.

 

 

Steel can also be plated with various metals after printing. Some of my designs are available in gold-plated steel, for example. Steel is an interesting material with a slightly pitted surface and a vintage feel but is only suitable for larger pieces with no thin parts. Shown to the right is the Axoneme pendant in gold plated steel.

 

For more information on the chemical composition of each material, please consult the following:

Sterling Silver: 93% Silver, 4% Copper, 3% Zinc

Brass: 80% Copper, 15% Zinc, 5% Tin

Bronze: 90% Copper,10% Tin Alloy

Gold plated brass (14K electroplated gold on brass)

Steel: 60% Steel, 40% Bronze matrix material